沃爾沃攤鋪機下鏈輪分式法蘭#87936134#8793612

法蘭(Flange)，又叫法蘭凸緣盤或突緣。法蘭是管子與管子之間相互連接的零件，用于管端之間的連接;也有用在設備進出口上的法蘭，用于兩個設備之間的連接，如減速機法蘭。法蘭連接或法蘭接頭，是指由法蘭、墊片及螺栓三者相互連接作為一組組合密封結構的可拆連接。管道法蘭系指管道裝置中配管用的法蘭，用在設備上系指設備的進出口法蘭。法蘭上有孔眼，螺栓使兩法蘭緊連。法蘭間用襯墊密封。法蘭分螺紋連接(絲扣連接)法蘭、焊接法蘭和卡夾法蘭。法蘭都是成對使用的,低壓管道可以使用絲接法蘭，四公斤以上壓力的使用焊接法蘭。兩片法蘭盤之間加上密封墊，然后用螺栓緊固。不同壓力的法蘭厚度不同，它們使用的螺栓也不同。水泵和閥門，在和管道連接時，這些器材設備的局部，也制成相對應的法蘭形狀，也稱為法蘭連接。凡是在兩個平面周邊使用螺栓連接同時封閉的連接零件，一般都稱為"法蘭"，如通風管道的連接，這一類零件可以稱為"法蘭類零件"。但是這種連接只是一個設備的局部，如法蘭和水泵的連接，就不好把水泵叫"法蘭類零件"。比較小型的如閥門等，可以叫"法蘭類零件"。

減速機法蘭，用于電機與減速機的連接，以及減速機與其它設備之間的連接。

免責聲明丨 部分內容來源網絡！本文僅供交流學習 , 版權歸屬原作者，部分圖片、內容推送時未能及時與原作者取得聯系，若來源標注錯誤或侵犯到您的權益煩請告知，我們將立即刪除.

企業介紹

公司供應攤鋪機配件，壓路機配件，銑刨機配件，攤鋪機刮板驅動軸，刮板驅動軸總成，找平儀，找平儀支架以及液壓泵和配件。我廠還供應攤鋪機易損件，攤鋪機平衡梁，攪龍軸，踏板，輸料底板，葉片，熨平板，減速機，鏈軌，履帶板，支重輪，刮板大鏈條，輸料鏈條等。

聯系人：梁經理

聯系方式：13645201509

（微信同號）

QQ：2870202745

Flange, also known as flange flange or flange. Flanges are the parts connecting pipes and pipes, which are used for the connection between pipe ends; The flange on the equipment inlet and outlet is also used for the connection between two equipment, such as the reducer flange. Flange connection or flange joint refers to the removable connection of flange, gasket and bolt as a group of combined sealing structure. The pipe flange refers to the flange used for piping in the pipeline device, and the inlet and outlet flanges of the equipment when used on the equipment. There are holes on the flange, and bolts make the two flanges tightly connected. The flanges are sealed with gaskets. The flange is divided into threaded connection (threaded connection) flange, welding flange and clamp flange. Flanges are used in pairs. Wired flanges can be used for low pressure pipes, and welded flanges can be used for pressure above 4kg. Add a gasket between the two flanges and fasten them with bolts. The thickness of flange under different pressure is different, and the bolts used are also different. When pumps and valves are connected with pipes, parts of these equipment are also made into corresponding flange shapes, also known as flange connection. All connecting parts that are bolted around two planes and closed at the same time are generally referred to as "flanges", such as the connection of ventilation pipes. Such parts can be referred to as "flange parts". But this kind of connection is only a part of the equipment, such as the connection between the flange and the water pump, so it is not easy to call the water pump "flange parts". Smaller parts such as valves can be called "flange parts".

Reducer flange is used for the connection between motor and reducer, as well as the connection between reducer and other equipment.

Disclaimer | Part of the content comes from the network! This article is only for exchange and learning. The copyright belongs to the original author. Some pictures and content are not timely contacted with the original author when being pushed. If the source label is incorrect or infringes your rights and interests, please inform us and we will delete it immediately

Enterprise introduction

The company supplies paver parts, roller parts, milling machine parts, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument support, hydraulic pump and accessories. Our factory also supplies vulnerable parts of pavers, paver balance beams, auger shafts, pedals, feeding soleplates, blades, screeds, reducers, chain tracks, track shoes, rollers, scraper large chains, feeding chains, etc.

Contact: Manager Liang

Contact: 13645201509

(WeChat with the same number)

QQ：2870202745