液壓配件與維修

產品描述

承托物料的輸料底板，需與前端張緊軸輥輪和后端驅動軸的節圓相切，否則會出現前端物料刮不凈、后端夾料跳齒等現象。尤其是輸料底板后段圓弧段，經過高點后要遠離鏈輪節圓，否則輸送鏈條倒轉時，其松緊狀況發生轉變，輸料刮板有可能會與圓弧段后端相碰。

免責聲明丨 部分內容來源網絡！本文僅供交流學習 , 版權歸屬原作者，部分圖片、內容推送時未能及時與原作者取得聯系，若來源標注錯誤或侵犯到您的權益煩請告知，我們將立即刪除.

QQ郵箱：2870202745@qq.com

網易郵箱：LS13645201509@163.com

The feeding base plate that supports the material must be tangent to the pitch circle of the front tension shaft roller and the rear drive shaft, otherwise there may be phenomena such as unclear scraping of the front material and jumping of the rear clamping teeth. Especially for the arc section of the rear section of the feeding bottom plate, after passing through the high point, it should be far away from the sprocket pitch circle. Otherwise, when the conveying chain is reversed, its tightness will change, and the feeding scraper may collide with the rear end of the arc section.

Disclaimer | Part of the content comes from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly communicated to the original author during push notifications. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it

Enterprise Introduction

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. Our factory also provides vulnerable parts for pavers, balance beams for pavers, auger shafts, pedals, conveying soleplates, blades, ironing plates, reducers, chain tracks, track shoes, supporting wheels, scraper chains, conveying chains, etc.

Contact person: Manager Liang

Contact information: 13645201509

(Same WeChat account)

QQ: 2870202745

QQ email: 2870202745@qq.com

NetEase email: LS13645201509@163.com